the MassMind
...content heavy,
light sales...
Kits | Books | Gadgets | Cables | Servo Components | Servicess | Motor Drivers
Products > Motor Drivers > 6064: 4AMP Stepper Motor Driver Kit.


Luc`s THB6064AH driver joins the other open source drivers supplied by the MassMind.org store, adding support for BiPolar motors up to 4 amps/phase at 50 volts.

It is based on the new THB6064AH chip (also known as the Toshiba TB6564AHQ^) which is a design improvement over the TB6560, adding support for better microstepping, lower resonance, and protection for power on sequence (which is a serious problem with the 6560).

Features

  • Single-chip bipolar sinusoidal micro-step stepping motor driver
  • Selectable phase drive (1/2,1/8,1/10, 1/16, 1/20, 1/32, 1/40, 1/64 step)
  • Drives 4.5 Amps (peak) and 4 Amp sustained at 50 volts. And unlike the cheap drivers advertised at only peak ratings elsewhere, it WILL drive 4A @ 50V = 200Watts continuously. ^
  • Built-in thermal shutdown(TSD) and over-current detection(ISD) circuit as well as back EMF protection
  • 2.3uS Step pulse response. With slight pluse stretch provided by the PCB, this driver will work with the Marlin based RAMPs controllers for 3D printers. Video proof. Now you can build a 3D printer big enough to extrude a house!
  • Unlike the TB6560, which absolutely requires logic power be stable before motor power is applied,^ the THB6064AH can survive motor power without logic power and will not intermittently short on power up. This is a VERY common failure of the cheap TB6560 drives. ^
  • Automatic idle drive power reduction.
  • 4 decay modes from 20 to 80 %
  • Output monitor pins (DOWN / ALERT)
  • Equipped with reset and enable pins
  • Uses high voltage BiCD process: Ron = 0.4 (typ.)
  • Packages: HZIP25-P-1.27 Easy to solder and desolder for replacement

NOTE: This is a Kit of parts; you must solder it together. It is not a beginner level kit. If you haven''t soldered before, please complete our soldering course and the 2 (low cost) projects it suggests before attempting this driver.
Kit does not include heat sink, main or logic power supply, motors, or wiring.

Customers in Europe may wish to purchase directly from the manufacturer for cheaper/faster shipping.

SPECIAL PROMOTION (for a limited time): Buy the full parts kit (not for the PCB / chip only options) at the standard price, build it, and then send us your results or post publicly online. We will pay you back $5 for a photo of it up and running. $20 for a video. $10 for a write up including your power supply voltage, motor rating (amps/phase, size, rated torque, etc...) and your review of how it worked (or didn`t) and what you liked (or hated) about the kit. Do all three and the kit is free!


level: Advanced!.
Picture of item #4160746064:
4AMP Stepper Motor Driver Kit.:
 $35.00 Backordered!   Expected in 6 weeks

Price breaks: @3 = $32.

You may also be interested in:
416076 Connect to RAMPS (replace Pololu)
416045 Cooling (for high power)
416025 Logic power from V+
416072 PCB only
416073 Replacement THB6064AH chip
416012 To connect to PC Parallel Port
416082 We can build it for you!
416015 ~Linistepper (smoother, Uni)

user @54.80.157.133, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Servo Components, Servicess, and these Motor Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 2 in stock
4Axis5_cHD:Cable for 4 drivers(1/4AXIS) PMinMO STD $4.95 3 in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 7 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 1 in stock
4Axis5_pwr:5V regulator parts $2.00 9 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 6 in stock
6064A: Adapter cable Pololu $4.95 2 in stock
6064C: Stepper Motor Driver (CHIP ONLY!) $10.95 8 in stock
Picture of item #416015RULMS3:
LiniStepper Driver kit NEW V3!
:
 $25.00 3 in stock
RULMS3_AMP2: Sense resistor set: 2 AMPS (1/AXIS) $1.00 9 in stock
RULMS3_FAN2:Heatsink/Fan YOU drill & tap (1/AXIS) $5.00 12 in stock
RULMS3_PCB: Linistepper V3 PCB ONLY $9.00 9 in stock
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 6 in stock
RULMS3_Q1-8: Drive Transisor set (1/AXIS) $5.95 1 in stock
RULMST_PIC: Lini_Telescope uC (Chip ONLY!) $19.95 1 in stock