the MassMind
...content heavy,
light sales...
Kits | Books | Gadgets | Cables | Servo Components | Servicess | Motor Drivers
Products > Motor Drivers > 6064A: Adapter cable Pololu

This cable / kit adapts the standard stepper driver connector on a RAMPs^ board (the Pololu driver) or other motion control board that normally uses Pololu drivers to the open source PMinMO standard so you can use any number of open source stepper motor drivers^.




Kit includes:

  • PCB
  • pin headers (inserts in place of Pololu)
  • PMinMO socket
  • 5" ribbon cable (connects to THB6064AH driver)

For more information, see the video and description.

connector2: Pololu standard for (e.g.) RAMPs.
connector1: PMinMO standard for THB6064.
length: 5 inches.
wire size: Ribbon.
conductors: 10.
6064A: Adapter cable Pololu $4.95 2 in stock

You may also be interested in:
416074 Replace Pololu on RAMPs with THB6064AH

user @54.198.108.19, your shopping cart is empty.

James Newton's MassMind.org offers Kits, Books, Gadgets, Cables, Servo Components, Servicess, and these Motor Drivers:

Picture of item #4160124Axis5:
BOB/Pulse/Power(PC Board ONLY)
:
 $8.00  in stock
4Axis5_c11M:Cable for 1 driver (1/AXIS) PMinMO STD $3.00 2 in stock
4Axis5_cHD:Cable for 4 drivers(1/4AXIS) PMinMO STD $4.95 3 in stock
4Axis5_pc:DB25 conn & cable for PC parallel port $9.95 7 in stock
4Axis5_pulse: Pulse generator parts ONLY $4.95 1 in stock
4Axis5_pwr:5V regulator parts $2.00 9 in stock
4Axis5_RLY:Relay driver (parts only!) $3.95 6 in stock
6064C: Stepper Motor Driver (CHIP ONLY!) $10.95 8 in stock
Picture of item #416015RULMS3:
LiniStepper Driver kit NEW V3!
:
 $25.00 3 in stock
RULMS3_AMP2: Sense resistor set: 2 AMPS (1/AXIS) $1.00 9 in stock
RULMS3_FAN2:Heatsink/Fan YOU drill & tap (1/AXIS) $5.00 12 in stock
RULMS3_PCB: Linistepper V3 PCB ONLY $9.00 9 in stock
RULMS3_PIC: Linistepper programmed uC (Chip ONLY!) $5.95 6 in stock
RULMS3_Q1-8: Drive Transisor set (1/AXIS) $5.95 1 in stock
RULMST_PIC: Lini_Telescope uC (Chip ONLY!) $19.95 1 in stock