Microchip PIC Alternatives

Alternatives to getting a plain PICmicro chip directly from Microchip or from a Microchip distributor:

• a pre-designed small PCB designed for prototyping that includes a PICmicro and a few other commonly-used parts: often much faster to get to a finished product than starting from scratch.
• "clones": code-compatible microprocessors, sometimes with a feature or two unavailble in the ones from Microchip
• functionally similar microprocessors

Small PCBs (is there a better term than "small PCB" for the sorts of PCBs that are specifically designed to be hacked and modified -- they have pins that are perfectly aligned to be plugged into a solderless breadboard, or they have a prototyping area on-board?)

• BASIC Stamp
• C Stamp
• OOPic: The Object-Oriented PIC. The "ooPIC-S" board is a PCB with a large prototyping area and a PIC16F877. The "ooPIC-C" is a tiny stamp-like PCB that plugs into a solderless breadboard. Both hold a PIC16F877, a Flash memory chip, 3 LEDs, a voltage regulator, and a RS-232 tranciever). Both run the "ooPIC III+" firmware.
• Protean Logic TICkit -- The module is directly programmable in a library-centric Functional Basic
• BeagleBoard PIC module plugs into standard solderless breadboard
• PIC-01 Development Board
• the HOODMICRO
• "modular PIC based single board computers (SBC) and expansion boards."
• SerReg (FIXME: is this really a development board?)
• Dontronics sells a variety of PIC-oriented proto boards and development boards (as well as development boards for several other popular microprocessors).
• LiniStepper designed to drive stepper motors
• Communitary Universal Microcontroller Programmer
• iRX Prototyping Board: a simple but malleable prototyping board for PIC based projects. It features the EEPROM programmable PIC16F84A, an MAX233 for RS232 port and infrared I/O. About half of the board is an empty prototyping area. Compare: Atmex.
• UBW (USB Bit Whacker) by Brian Schmalz ... "The UBW board ... contains a Microchip PIC USB-capable microcontroller, headers to bring out all of the PICs signal lines (to a breadboard for example) ... costs about $15-$20 to build and is powered from the USB connection. ... All tools used to design this project are free, and the design is open to anyone to use for whatever they wish. Please build your own and improve upon it! If you don't want to build your own, you can buy them assembled and tested ... SparkFun hosts a USB forum where the UBW is a common discussion topic."
• [FIXME: there may be a few more mentioned at that ought to be listed here.]
• ...
• Bread Board Power Supply -- a tiny little board that fits between a wall-wart and plugs into a solderless breadboard to supply regulated power. It accepts a wide variety of wall-warts because its full-wave rectifier and LM317 handle a wide range of AC and DC power supply, and its screw terminal headers let you plug in the wires.
• ...
• Boarduino aka solderless breadboard Arduino clone (plugs into solderless breadboard; based on Atmel AVR ATmega168)
• Tutorial: SparkFun ProtoShield Assembly + Use shows how to use the ProtoShield development board with a Arduino
• A huge list of Makezine kits, a few of which ("Daisy MP3 player", some of the RepRap projects, "The IR-ritator", etc.) use PICmicros, a few others that use Atmel AVRs (TV-B-Gone, etc.), one that uses a Freescale processor ...
• BlinkM, which can be used as a AVR ATtiny45 development board
• Atmex: An entry-level Atmel Experimentation System. less than $10; includes Atmel ATtiny2313; a DB-9 and MAX232 for serial communication and downloading new programs (using a bootloader); LED. About half of the board is an empty prototyping area. Meant to be better than the iRX board.
• ...
• "nanocore12", much like the BASIC Stamp but using a Motorola/Freescale HCS12 instruction set www.nanocore12.com technological arts
• ...
• "the Hammer": a Samsung S3C2410A ARM9 CPU board in a 40-pin DIP package, ready to plug into a solderless breadboard. Pre-loaded with Linux.

Clones:

• SXs, Ubicom SX processors are pin and binary code compatible with the PIC line and run at 50 and 100 MIPS (not just MHz, MIPS!) They are drop in replacements and you can even code for them with MPLAB. Very Recomended.
  • PIC MPASM source to SX SASM Source Converter by Nikolai Golovchenko
  • http://www.geocities.com/SiliconValley/Network/9276/downld.htm Macros for using Parallax instructions with MPASM. Also Prlx.asm
• http://www.holtek.com
• Thomas A. Coonan CPLD IP for PIC!
  • Verilog Synthetic PIC (active version)
  • Original Synthetic PIC (old VHDL version)
• http://www.opencores.org/cores/minirisc/  This is a Mini-RISC CPU/Microcontroller that is compatible with the PIC 16C57 from Microchip.
• 100% compatibles?  http://www.g-alantic.com.tw/icproducts.htm

Other popular, functionally similar microcontrollers:

• The Atmel AVR AT90523131200 is like the PIC processor line
• Freescale ...
• Some ARM processors (32-bit) cost less than some 8-bit PIC processors.

Comments:

PICList 2008 contributors: o List host: MIT, Site host massmind.org, Top posters @20080517 Apptech, Xiaofan Chen, Jinx, David VanHorn, Bob Axtell, Alan B. Pearce, Cedric Chang, William \Chops\ Westfield, bean, Gerhard Fiedler, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Larry Williams, David VanHorn, Bryan Whitehouse, Timothy Weber, David Challis. Peter Todd. on-going support is MOST appreciated! * Contributors: Neil Narwani, David Cary, Elemer AM Nyiry, Philip J Taylor, Gus Calabrese of Omegadogs.com, Gautama Venegas, Patrick B. Murphy, William Chops Westfield, Peter Todd, Leslie Ellis

  .