To develop a device programming platform that
In a sudden flurry of activity, it seems that nearly all of the remaining hardware questions have been resolved. Soon it will become time for the software development stage to begin. James is beginning work on an interpreter specification while Wayne and I go our seperate ways in our attempts to build a good MB.
The hardware section will be being updated shortly with new information CUMP.
Well, it appears that there may finally be some progress here. We are on our way to developing a CUMP bus spec.
See the Hardware section for the work in progress.
While it may be too soon to say--considering how fast development of the CUMP project has picked back up over the past few days--I am somewhat disappointed in the level of participation of all but a select few members of the CUMP list.
As should be obvious from the inactivity of both the list and this site, the whole CUMP project is in a bit of a slump right now. I hope it'll get back into the swing of things before too long, but right now there aren't really any signs of that happening.
Currently, the biggest discussion going is whether the bus should be left with the original parallel configuration or if it would be better to drop that entirely and go for a serial implementation of the CUMP concept.
If the serial implementation is decided upon, then the next question is which serial protocol to use for inter-board communications. Currently, the two contenders seem to be I2C and RS-422.
I've finally gotten around to reworking this site. It should get a lot better soon. Here are some of the changes that I will be making:
I'm going to see what I can do about W3C compliance, but I don't know how much I can do about that within the PICList.com framework. Go here for the old page.
| file: /techref/piclist/cump/index.htm, 3KB, , updated: 2004/1/3 02:48, local time: 2008/7/4 19:52,
owner: BJM-bigfoot-486,
38.103.63.16:LOG IN
|
| ©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.piclist.com/techref/piclist/cump/index.htm"> Communitary Universal Microcontroller Programmer</A> |
| Did you find what you needed? |
|
PICList 2008 contributors:
o List host: MIT, Site host massmind.org, Top posters @20080704 Apptech, Jinx, Xiaofan Chen, David VanHorn, Alan B. Pearce, Bob Axtell, William \Chops\ Westfield, Cedric Chang, Gerhard Fiedler, bean, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Larry Williams, David VanHorn, Bryan Whitehouse, Timothy Weber, David Challis. Peter Todd. on-going support is MOST appreciated! * Contributors: Neil Narwani, David Cary, Elemer AM Nyiry, Philip J Taylor, Gus Calabrese of Omegadogs.com, Gautama Venegas, Patrick B. Murphy, William Chops Westfield, Peter Todd, Leslie Ellis |
|
.