SX Microcontroler LCD IO routines

Methods

• Matrix LCD driver
   
• 4-bit 8x2 Hitachi LCD driver
   
• lcd8xmpl.src PDF 8-Bit LCD Interface Interfacing an SX uC to a Hitachi HD44780-Driven LCD display, using an 8-bit parallel data bus without interrupts.
   
• lcd4xmpl.src PDF 4-Bit LCD Interface Interfacing an SX uC to a Hitachi HD44780-Driven LCD display, using a 4-bit parallel data bus without interrupts.
   
• PIC C Hitachi LCD Drivers by Andy Kunz
   

Integrations:

• lcd.src Comparitive resistance meter with LCD Driver This software uses two software A/D converters, on pins RB.5 and RB.6, to read in a known resistance value, and compare it to an unknown, and then outputs the results on an 8-segment LCD. The RA pins drive the commons, and the RC pins drive the characters

PIC LCD drivers@

Also:

• Character Set Data and The character set extractor by Nikolai Golovchenko
• Bitmap to table converter Opens FNT (Windows Bitmap Font) or BMP (Windows Bitmap Picture) files and writes out a C language data table.

See also:

• http://www.idcomm.com/personal/ottosen/  Display large characters on a graphic LCD. No graphics controller required.
• http://1uffakind.com/robots/povBitMapBuilder.php online bit map editor for graphic LCDs. Produces listings in several formats (SASM, PBasic, SX/B) for the bitmap you draw on the screen. Also "de-compiles" listings back into the editable bitmap. Very nice.
• http://www.parallax.com/dl/docs/cols/nv/vol5/col/nv109.pdf Interface to LCD panel with Microchip MCP23016 uses only 2 SX pins.

PICList 2025 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .