PAGE addr |
|
| Description: | Transfer addr .11:addr .9 into PA2 : PA0 , will delay skipping |
| Operation: | page = addr >> 9 |
| Flags affected: | PA0..2 |
| Registers affected: | - |
| Sources referenced: | - |
| Cycles: | 1 |
| Opcode: | |
| Details: | SX Users Manual page # 112 # 34 |
| Microchip PIC syntax: | |
| Notes: | |
PAGE n - The three literal bits of "n" are loaded into the page-select bits PA2:PA0 in the STATUS register. This normally prepares a GOTO or CALL across a page boundary. PA2 is currently unused since 2K of instruction memory is only four pages.
Skipping a page instruction will also cause the instruction following the page instruction to be skipped. This is designed to handle long calls which must be coded as a page then a call. See Skip for more details.
See:
| file: /techref/scenix/inst/page.htm, 2KB, , updated: 2007/9/24 13:26, local time: 2009/11/7 22:21,
38.107.191.80:LOG IN
|
| ©2009 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.piclist.com/techref/scenix/inst/page.htm"> SX Embedded Controller Instruction - PAGE addr</A> |
| Did you find what you needed? |
|
Calculator 7-seg LED chars, port values, resistor color codes and common values, ohms law, wavelength / frequency, RMS and Peak, max value for x bits, etc... |
SX MASTERS: Eric Smith and Richard Ottosen's SERVID is an intellegent RS232 video terminal (4x20 character display) in one chip. See the write up here.. |
.