please dont rip this site

PIC Microcontoller Delay Method

Delay X cycles (0-1024) macro by Mike Harrison

Mike Harrison [mike@WHITEWING.CO.UK] says:

While we're on the subject of inline delays, here's a handy 'delay any number of cycles' (within reason!) macro I did when messing with generating TV timings :
usage : wait n delays n cycles, n = 0 to about 1024.


shortwait macro del  ; used by main wait macro
 if (del>3) && (del<8) call del7+(7-(del)) endif if del <4 if del>=2 
  goto $+1
  endif
  if ((del) & 1) == 1
  nop
  endif
 endif
 endm

 ; main macro - generates code to wait for (del) cycles)

wait macro del 

 if (del)<0 error 'negative delay' endif if (del)>=8 
 movlw ((del)-8) /4 
 call delay
 shortwait ((del-8) % 4) 
 else
 shortwait (del)
 endif
 endm

delay  
 addlw 0ff 
 skpnc 
 goto delay
 return
 
del7 goto del5  ; 7 cycle delay
del6 goto del4  ; 6 cycle delay
del5 nop           ; 5 cycle delay
del4 return       ; 4 cycle delay

file: /Techref/microchip/delay/xb0cr-mh.htm, 1KB, , updated: 2007/6/22 14:54, local time: 2024/10/31 16:55,
TOP NEW HELP FIND: 
18.226.200.16:LOG IN
©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.piclist.com/techref/microchip/delay/xb0cr-mh.htm"> Delay X cycles (0-1024) macro by Mike Harrison</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed? From: "/piclist/microchip/delay/xb0cr-mh.htm"

  PICList 2024 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .