The number of things that move past a point in a given time is proportional to how hard they are pushed divided by how much they resist.
Enter any two known values and press "Calculate" to solve for the others. For example, a 100 watt light bulb operating on 120 volts AC will have 144 ohms of resistance and will draw 0.833 Amps. Enter 100 in the Watts field and 120 in the Voltage field and press Calculate to find the resistance and current. Fields should be reset to 0 before each new calculation.
|file: /Techref/ohmslaw.htm, 4KB, , updated: 2016/7/6 10:49, local time: 2018/11/18 22:09,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/ohmslaw.htm"> Ohms Law</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181118 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Bob Blick, Neil, Manu Abraham, John Gardner, AB Pearce - UKRI STFC,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!