please dont rip this site

Microsoft Macro Assembler


x86 Instructions@, MASM Instructions, Win32Asm, Win32Prg/API,

Routine and Macro Library

Specify values with: (the decimal number 10 is shown on each line as an example)

MASM (the 32bit only version) is available at no cost from Microsoft at:

http://www.microsoft.com/ddk/download/98/BINS_DDK.EXE (2.9 MBytes)
http://www.microsoft.com/ddk/download/98/98SETUP.EXE (1.9 MBytes)

After downloading each file, execute them to extract the files. Then run the setup program. MASM is the ml.exe file in the 98ddk/bin/win98 directory. It is version 6.11d that can be patched to 6.13. This is not the same as purchasing MASM product. The linker is 32 bit and will not create 16-bit DOS programs. To do this, you must have Microsoft's Linker version 5.63 that is available from Microsoft's FTP site: ftp://ftp.microsoft.com/softlib/mslfiles/lnk563.exe. Also, neither the Programmer's Work Bench nor CodeView for debugging are included in the full DDK. Other debuggers are available free of charge from MS.

Or in a much nicer package from MASM32 specifically geared to writing win32 programs in assembler.

MAPSYM is used to convert .MAP files to .SYM symbol files suitable for a debugger.

See also:

Code:

Comments:


file: /Techref/language/masms.htm, 10KB, , updated: 2013/7/22 16:17, local time: 2014/11/22 16:07,
TOP NEW HELP FIND: 
54.161.210.58:LOG IN

 ©2014 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/language/masms.htm"> Microsoft Macro Assembler</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2014 contributors:
o List host: MIT, Site host massmind.org, Top posters @20141122 RussellMc, Richard R. Pope, IVP, John Gardner, alan.b.pearce, James Cameron, David C Brown, Bob Blick, Isaac Marino Bavaresco, Josh Koffman,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .