WinDbg can be used to do user mode debug of applications running on the same machines as the debugger, but because it is common to stop instruction execution on the processor during debugging, especially for kernal mode code like device drivers, it is best to use two systems. One hosts the debug user interface and the other runs the code being debugged. They must be connected via a cable of some sort; prior to Win 8 USB or serial cables are necessary, but with Win 8 and above, the network can also be used. In some situations, it is possible that the second system is a virtual system, for example, a virtual PC that is running on the same PC; however, if you are working with code that closely accesses hardware, this is not a good idea.
WinDbg can also be used to open and analyse crash dump files.
|file: /Techref/language/asm/debugs.htm, 3KB, , updated: 2016/11/2 15:24, local time: 2018/10/23 12:33,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/language/asm/debugs.htm"> MS Windows Debuggers</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181023 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Neil, Bob Blick, John Gardner, Harold Hallikainen, AB Pearce - UKRI STFC,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!