the MassMind
...content heavy,
light sales...
NOTICE: This store is closing
Kits | Books | Gadgets | Cables | Stepper Drivers | Services |
Products > > ENC2a: AS5134 High Speed Magnetic Encoder.

Based on the amazing AS5134 chip, this encoder senses the position of a two pole radially magnetized disk over a full revolution using a hall effect sensor array. The sensor signal changes are converted to a digital quadrature signal, and the position information stored as absolute position data on some registers, which are readable through a 3 wire synchronous serial interface. Standard quadrature Index, A and B phase signals are also generated just like any standard encoder.

  • 360 CPR, 76,875 RPM
  • Non-contact magnetic sensor.
    - No need to mechanically attach to a shaft, just epoxy a small magnet in place.
    - Alignment isn`t critical. As long as the magnetic field is generally over the chip, within 1/2 inch, it will work quite well
  • The onboard LED indicates that the board is powered, and provides easy testing the alignment of the IC with respect to the magnet.
  • Multiple connection / cable options are supported.
  • Standard Quadrature A and B phase outputs, as well as several digital modes.

level: easy.
ENC2a: AS5134 High Speed Magnetic Encoder. $12.95 Backordered!   Expected in 10 weeks

You may also be interested in:
416083 ENC2b: High Resolution Motor Encoder
416079 PID Controller for Servo system

user @, your shopping cart is empty.

James Newton's offers Kits, Books, Gadgets, Cables, Stepper Drivers, Services, and these :