please dont rip this site


Makers of the SXDEV Ubicom SX Embedded Controller Debugging Tool

The SX devices are totally compatible, drop in replacements for PIC 16C5x processors with emulation circuitry built in to the production device so what the ICE sees... is what the Processor saw!!! And they run at 50-75 MIPS (not just MHz, MIPS!). They are so fast, jitter-free, and deterministic, that many hardware functions can be "virtualized" into the software, reducing chip count and increaseing versatility.

The SXDEV can be powered from target board, draws less than 5 mA, 120...150 MHz, down to 3V, use any clock source (quartz, ceramic resonator, oscillator or external clock) and have advanced IDE with many features supported: for example, Timers and Bank0 support for SX48/52, data injection mode, extended watch attributes, external assembler SASM or MPASM, external simulator SxSim and external C compiler Hitech C (free version). Uses a serial port and finds it automatically. The IDE runs under Windows and is know to work under Linux using Wine.

Available from in the US and Canada for $120 + s&h while supplies last.

Users manual in PDF or online CCS HTML (standard HTML coming soon) Screen shots: Debugging, Editing, Watches, Programming

The SX-DEV debugging with watches, source code and registers.

See also:

file: /Techref/com/svtehs/index.htm, 2KB, , updated: 2004/5/19 16:35, local time: 2018/3/21 06:07,

 ©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF=""> svtehs</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2018 contributors:
o List host: MIT, Site host, Top posters @20180321 RussellMc, Isaac M. Bavaresco, Sean Breheny, Van Horn, David, Neil, alan.b.pearce, Bob Blick, David C Brown, John Gardner, Brent Brown,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!