/images/boards/sprinkler/sprinkler.gpi

Photoplotter Info File: C:/Program Files/EAGLE-4.09r2/projects/sprinkler/sprinkler.gpi

 Date              : 10/03/2002 02:53:52p
 Plotfile          : C:/Program Files/EAGLE-4.09r2/projects/sprinkler/sprinkler.sts
 Apertures         : C:/Program Files/EAGLE-4.09r2/projects/sprinkler/sprinkler.whl
 Device            : Gerber photoplotter

Parameter settings:

 Emulate Apertures : no
 Emulate Thermal   : no
 Emulate Annulus   : no
 Tolerance Draw  + :  1.00 %
 Tolerance Draw  - :  1.00 %
 Tolerance Flash + :  1.00 %
 Tolerance Flash - :  1.00 %
 Rotate            : no
 Mirror            : yes
 Optimize          : yes
 Auto fit          : yes
 OffsetX           : 0inch
 OffsetY           : 0inch

Plotfile Info:

 Coordinate Format : 2.4
 Coordinate Units  : Inch
 Data Mode         : Absolute
 Zero Suppression  : None
 End Of Block      : *

Aperture Tolerances:

 -------- Requested Aperture --------  ------ Used Aperture ------

 Shape     Size                  used  Code     Shape     Size

 oval      0.0528inch x 0.0968inch     2  D18      oval      0.0528inch x 0.0968inch
 round     0.1417inch               3  D53      round     0.1417inch
 octagon   0.0792inch              12  D56      octagon   0.0792inch

Apertures used:

 Code     Shape     Size                  used

 D14      oval      0.0624inch x 0.1144inch    36
 D18      oval      0.0528inch x 0.0968inch     2
 D22      octagon   0.0624inch              30
 D25      oval      0.0720inch x 0.1320inch    19
 D26      round     0.1560inch               1
 D29      round     0.0720inch               1
 D31      octagon   0.0720inch               9
 D35      oval      0.1144inch x 0.0624inch     2
 D39      oval      0.1320inch x 0.0720inch     6
 D41      round     0.1200inch               1
 D43      octagon   0.1200inch               1
 D46      round     0.0624inch               1
 D48      octagon   0.0840inch               3
 D50      octagon   0.1020inch               1
 D52      oval      0.1716inch x 0.0936inch     2
 D53      round     0.1417inch               3
 D56      octagon   0.0792inch              12
 D60      round     0.0480inch               4

file: /images/boards/sprinkler/sprinkler.gpi, 2KB, , updated: 2002/10/3 13:53, local time: 2012/2/10 08:14,

^{38.107.179.234:LOG IN}

©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE! /

<A HREF="http://www.piclist.com/images/boards/sprinkler/sprinkler.gpi"> </A>

Did you find what you needed?

Stepper motors CAN be smooth! And stepper controllers can be strong and cheap. Roman Black's Linistep stepper controller kits:

o 18th microstep
o Linear smoothing

o Open source
o Full kit $25!