Richard Ottosen has developed a version of the Digital Frequency Synthesizer described in Tom Napier's article "Digital Frequency Synthesis" in issue 99 (October 1998) of Circuit Cellar INK (http://www.edtn.com/embapps/emba057.htm). The frequency is set by a serial input and can varied from less than 1Hz to over 500KHz.
Richard Ottosen has developed an improved version of the Digital Frequency Synthesizer described in Tom Napier's article "Digital Frequency Synthesis" in issue 99 (October 1998) of Circuit Cellar INK (http://www.edtn.com/embapps/emba057.htm). It uses direct digital synthesis (DDS) to generate sine, triangle and square waveforms. The frequency, waveform and amplitude are all set numerically. The frequency can be varied from less than 1Hz to over 500KHz. The amplitude can be a few millivolts to a few volts.
|file: /Techref/scenix/lib/io/osi1/dfs/index.htm, 3KB, , updated: 2007/7/31 15:44, local time: 2020/1/27 21:59,
|©2020 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/scenix/lib/io/osi1/dfs/index.htm"> Digital Frequency Synthesis</A>
|Did you find what you needed?|
PICList 2020 contributors:
o List host: MIT, Site host massmind.org, Top posters @20200127 RussellMc, Bob Blick, Jason White, Allen Mulvey, Sean Breheny, David C Brown, Ryan O'Connor, Jim, Brent Brown, James Cameron,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!