please dont rip this site

SX Embedded Controller Instruction

MOV fr1,fr2

Description: Move fr2 into fr1
Operation: fr1 = fr2
Flags affected: Z
Registers affected: W fr1
Sources referenced: fr2
Cycles: 2
Actually compiles to: mov W, fr2; mov fr1, W
Microchip PIC syntax: MOVF fr2,0; MOVWF fr1

See also:

file: /Techref/scenix/inst/movfr1fr2.htm, 1KB, , updated: 2001/9/10 12:14, local time: 2019/10/17 20:00,

 ©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF=""> SX Instruction MOV fr1,fr2</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2019 contributors:
o List host: MIT, Site host, Top posters @20191017 RussellMc, David Van Horn, Bob Blick, AB Pearce - UKRI STFC, Neil, Jason White, Dwayne Reid, James Cameron, David C Brown, Manu Abraham,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!