Version: All
Description: This is a clearable message indicating that the memory configuration of your printer has changed. Normally it is displayed only by LaserJet 4+ or 4M+ printers.
Workaround: None. This message is generated by the printer and cannot be changed. It may be cleared by selecting [Continue]. Hold down the Shift button, first one in the bottom row, and press Continue, the third one in the bottom row.
Resolution: You may safely ignore this message; clear with [Continue] on printer panel. Cleared or not, the message will not interfere with printing or SIMM operations.
Submitted by: Technical Department
| file: /techref/printer/itm358.htm, 1KB, , updated: 2003/8/18 15:55, local time: 2009/1/8 00:54,
38.103.63.58:LOG IN
|
| ©2009 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.piclist.com/techref/printer/itm358.htm"> "WM MEM CNFIG N/A" message after installing Flash SIMM.</A> |
| Did you find what you needed? |
|
PICList 2009 contributors:
o List host: MIT, Site host massmind.org, Top posters @20090108 olin piclist, Jinx, eagletalontim, Vitaliy, solarwind, JonnyMac, apptech, Sean Breheny, M.L., cdb, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Timothy Weber, on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
|
.