please dont rip this site

Number: 334 06/12/96  Download to HP LJ 5Si SmartSIMM version 3.00 from TransForm prints garbage.

Desription: Using RAM-FLASH-DISK from TransForm to download forms or fonts into the 5Si SmartSIMM with firmware version 3.00 causes the printer to print garbage data if more than one form or font is in the project. Also, the printer reports that it is doing an internal test repeatedly during the download. The printer may refuse to print a status page.

This error is caused by a timing problem in the printer that causes the printer to go off-line and lose data between download segments. While the printer is off-line after the first form or font is downloaded, some data from the next form or font is lost.

Workaround: Downloading one form at a time will work despite the internal test message on the printer.

Resolution: fixed in TransForm version 2.1L

Submitted by:
James Newton
Thomas Villwock
Mr. Howard Roberts

See also:

file: /Techref/printer/itm334.htm, 1KB, , updated: 1999/11/4 15:23, local time: 2012/2/10 03:13,
TOP NEW HELP FIND: 
38.107.179.234:LOG IN
 ©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/printer/itm334.htm"> Download to HP LJ 5Si SmartSIMM version 3.00 from TransForm prints garbage.</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 
DON'T THROW IT AWAY! We part out dead printers, faxes, and other small mechanical items for hobby use and to support our web sites. And we pay shipping in California or pick up in San Diego North County. Call 1-619-652-0593 or email jamesnewton@massmind.org
 

Robotics nuts!

Check out http://users.frii.com/dlc/robotics/projects/botproj.htm from Dennis Clark. This guy ROCKS! He has made (and sells but also releases code, docs, etc...) for a number of cool little robotic modules including whiskers, IR proximity detect and remote control, Sonar proximity detect, PWM, Servo, compass. Most of these use the little PIC 12C508 controller which costs basically nothing and is soooo tiny.
The 4 servos, 2400 baud serial servo controller is a wonder of magic and he sells the programmed chip for $8. Wow!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .