...the jpic library must be updated with user definited bites and registers and the LCD pin's library set in acordingly with the hardware:
var volatile bit adcon0_go at f877_adcon0 : 2 var volatile byte f877_adcon1 at 0x9F var volatile byte f877_adcon0 at 0x1F var volatile byte f877_adresl at 0x9E var volatile byte f877_adresh at 0x1E
include f877_4 include jpic include jprint include jdelay include hd447804 var byte data var byte ch0_hi = 0 var byte ch0_lo = 0 bank_1 f877_adcon1 = 0b_1000_1110 -- first bit: left-0,right-1 justified, -- a0 input,a2,a3,a5,e0,e1,e2 digital bank_0 f877_adcon0 = 0b_0100_0001 -- fosc/8 clock, a0, ad on procedure analog is adcon0_go = high -- start conversion while adcon0_go loop end loop -- wait for ad completion end procedure hd44780_clear forever loop analog ch0_hi = f877_adresh bank_1 asm movf f877_adresl,w asm bcf status_rp0 -- bank 0 asm movwf ch0_lo hd44780_line1 print_decimal_1 ( hd44780, ch0_hi, "0" ) hd44780_position ( 2 ) print_decimal_3 ( hd44780, ch0_lo, "0" ) delay_100mS ( 3 ) end loop
|file: /Techref/piclist/jal/adjal-vs.htm, 1KB, , updated: 2001/11/7 06:34, local time: 2018/12/12 05:04,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/piclist/jal/adjal-vs.htm"> PIC JAL IO Routine </A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181212 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Neil, Isaac M. Bavaresco, Bob Blick, Harold Hallikainen, AB Pearce - UKRI STFC, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!