Any techref member who wishes to may post a personal, resume, or private page at this location.
Infact, after you join, recieve your password by email and log in, every page on this site will have a small form at the bottom that allows you to add your own comments, links, and entire web pages to the site. PLEASE DO SO!
The update form adds:
We call this TANSTAAFL web hosting. We don't charge, but we do:
If the "Private" box is checked, any content you add will be removed from pages before they are shown to other members or non-members and will not be published. Private information will never be released except as required by law-enforcement officers.
Don't worry about editing any new content you add to the main pages; our editing staff will review and correct, if necessary, all new posts. Unless you are interested in becomming an editor, you will not be able to edit the content of pages created by other members.
Any new pages you create will be "owned" by you and you will be able to edit the source of these pages by clicking on an edit link which will appear at the bottom of the page when you are logged in.
James Michael Newton
Types of Techref People:
The problem is that you signed up before the Nimda virus was released. That
virus uses the double dot "../" in the path part of a request to a web server
to attempt to get to non-public files that are a part of the OS on the web
server. Your original member id was entered with dots in it:
SV-I.N.C.D.T.I.M.-A35a which I have now changed to SV-INCDTIM-A35a. In an
attempt to reject Nimda generated requests, I have set the web server to
ignore all requests with dots in the path. This results in your member home
page being rejected. I have since changed the new member page so that dots
in the member id are removed, but I had to manually rename your home page
and ID to delete the dots. Now, the link on your name in the question above
will point to your member home page and you will be able to edit that home
page and add other pages from it if you are logged in.
Recently I got a Picstart 16B, but it´s unsupported by Microchip. Searching the web I noticed that NewFound Electronics (Australia) had released an firmware upgrade for this programmer, the Phoenix, but it is not longer available from them (It is still supported by this companye same company). I can use another programmer but it will be very useful to "recover" this picstart 16B. I would greatly appreciate any help.
|file: /Techref/people.htm, 4KB, , updated: 2013/7/23 09:49, local time: 2018/11/14 14:52,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/people.htm"> People</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181114 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Neil, Bob Blick, John Gardner, AB Pearce - UKRI STFC, Harold Hallikainen,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!