Used to remove hot air from inside a home and replace it with cooler air from the outside in the late afternoon or evening. Very effective after hot summer days when there is little or no wind. Even a short run can cool the house 10 to 20 degrees.
Combine with "earth tubes" to cool during the heat of the day.
Once the outside air has been drawn into the house, there is no point in running the fan any longer. Fans with low speed modes or automatic controlls may be justified.
Calculate the interior square footage of living area (do not include garage, attic or basement) and multiply the total square footage by three. This will give you the CFM number required for the whole house fan
Consider using some foam, rubber or other material to isolate vibration when mounting the fan.
The shutter will leak hot air during the winter unless the fan can be sealed in the fall and re-opened in the spring.
|file: /Techref/other/wholehousefan.htm, 3KB, , updated: 2016/9/24 00:25, local time: 2022/1/18 11:54,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/other/wholehousefan.htm"> Whole House Fans</A>
|Did you find what you needed?|
PICList 2022 contributors:
o List host: MIT, Site host massmind.org, Top posters @20220118
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!