Displays or sets the system time. TIME [time] Type TIME with no parameters to display the current time setting and a prompt for a new one. Press ENTER to keep the same time. If Command Extensions are enabled the TIME command supports the /T switch which tells the command to just output the current time, without prompting for a new time.
| file: /techref/os/win/winnt/slide66.htm, 1KB, , updated: 2004/5/26 14:03, local time: 2008/11/22 03:59,
38.103.63.58:LOG IN
|
| ©2008 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? Please DO link to this page! Digg it! <A HREF="http://www.piclist.com/techref/os/win/winnt/slide66.htm"> Help for all NT Version 4.0 commands</A> |
| Did you find what you needed? |
|
PICList 2008 contributors:
o List host: MIT, Site host massmind.org, Top posters @20081122 Apptech, Jinx, Xiaofan Chen, olin piclist, Vitaliy, William \Chops\ Westfield, Tamas Rudnai, JonnyMac, Alan B. Pearce, Gerhard Fiedler, * Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Shultz Electronics, Timothy Weber, on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
|
.