Stores the current directory for use by the POPD command, then changes to the specified directory. PUSHD [path | ..] path Specifies the directory to make the current directory. If Command Extensions are enabled the PUSHD command accepts network paths in addition to the normal drive letter and path. If a network path is specified, PUSHD will create a temporary drive letter that points to that specified network resource and then change the current drive and directory, using the newly defined drive letter. Temporary drive letters are allocated from Z: on down, using the first unused drive letter found.
file: /Techref/os/win/winnt/slide51.htm, 1KB, , updated: 2004/5/26 15:03, local time: 2024/4/24 22:19,
3.133.108.241:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/techref/os/win/winnt/slide51.htm"> Help for all NT Version 4.0 commands</A> |
Did you find what you needed? |
PICList 2024 contributors:
o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Welcome to www.piclist.com! |
.