please dont rip this site
previous | start | next

DATE 

Displays or sets the date.

DATE [date]

Type DATE without parameters to display the current date setting and
a prompt for a new one.  Press ENTER to keep the same date.

If Command Extensions are enabled the DATE command supports
the /T switch which tells the command to just output the
current date, without prompting for a new date.

Back to the top of this page

Dates in NT Batch Files


previous | start | next

See also:

file: /Techref/os/win/winnt/slide19.htm, 1KB, , updated: 2004/5/26 14:30, local time: 2012/2/10 06:21,
TOP NEW HELP FIND: 
38.107.179.232:LOG IN
 ©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/os/win/winnt/slide19.htm"> Help for all NT Version 4.0 commands</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 
Check out Doug Woods' EXCELLENT
PIC Microcontroller Instruction Set Quick Reference and Core Comparison Matrix
 

Peter Todd has released source and sample projects for his artwork, including his 3d wireframe cube renderer for the PIC 18f6520 This includes examples of hardware developed with free software tools such as gEDA/gschem/PCB, SDCC, gputils and picp all on Linux. http://petertodd.ca/art/source-code/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .