RASMONITORDLG info  Overview  Group

The RASMONITORDLG structure is used in the RasMonitorDlg function to specify additional input and output parameters.

typedef struct tagRASMONITORDLG {

    IN  DWORD dwSize;

    IN  HWND  hwndOwner;

    IN  DWORD dwFlags;

    IN  DWORD dwStartPage;

    IN  LONG  xDlg;

    IN  LONG  yDlg;

    OUT DWORD dwError;

    IN  DWORD reserved;

    IN  DWORD reserved2;

} RASMONITORDLG;

 

Members

dwSize

Specifies the size of this structure, in bytes. Before calling RasMonitorDlg, set this member to sizeof(RASMONITORDLG) to indicate the version of the structure. If dwSize is not a valid size, RasMonitorDlg fails and sets the dwError member to ERROR_INVALID_SIZE.

hwndOwner

Identifies the window that owns the modal RasMonitorDlg property sheet. This member can be any valid window handle, or it can be NULL if the property sheet has no owner.

dwFlags

A bit flag that indicates the options that are enabled for the property sheet. You can specify the following value.

Value	Meaning
RASMDFLAG_PositionDlg	Causes RasMonitorDlg to use the values specified by the xDlg and yDlg members to position the dialog box. If this flag is not set, the dialog box is centered on the owner window, unless hwndOwner is NULL, in which case, the dialog box is centered on the screen.

dwStartPage

A set of bit flags that indicate the initial page of the property sheet to display on top. You can specify one of the following values.

Value	Meaning
RASMDPAGE_Status	Display the Status page on top. This is the default.
RASMDPAGE_Summary	Display the Summary page on top.
RASMDPAGE_Preferences	Display the Preferences page on top.

xDlg

Specifies the horizontal screen coordinate of the upper-left corner of the property sheet. This value is used only if the RASMDFLAG_PositionDlg flag is set.

yDlg

Specifies the vertical screen coordinate of the upper-left corner of the property sheet. This value is used only if the RASMDFLAG_PositionDlg flag is set.

dwError

The RasMonitorDlg function sets this member to a system error code or RAS error code if an error occurs. If no error occurs, the function sets dwError to zero. This value is ignored on input.

reserved

Reserved; must be zero.

reserved2

Reserved; must be zero.

See Also

RasMonitorDlg 

PICList 2025 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .