The SwitchToFiber function schedules a fiber.
// pointer to fiber to switch to
This function does not return a value.
The SwitchToFiber function is used to manually schedule a fiber. This function saves the state information of the current fiber and restores the state of the specified fiber. The caller of this routine must be a fiber.
You create fibers with CreateFiber. Before you can schedule fibers associated with a thread, you must call ConvertThreadToFiber to set up an area in which to save the fiber state information. The thread is now the currently executing fiber.
Warning Avoid making the following call:
SwitchToFiber( GetCurrentFiber() );
This call causes unpredictable problems.
|file: /Techref/os/win/api/win32/func/src/f87_14.htm, 2KB, , updated: 2000/4/7 12:19, local time: 2022/5/25 16:24,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/os/win/api/win32/func/src/f87_14.htm"> SwitchToFiber</A>
|Did you find what you needed?|
PICList 2022 contributors:
o List host: MIT, Site host massmind.org, Top posters @20220525
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!