The ShowCursor function displays or hides the cursor.
// cursor visibility flag
The return value specifies the new display counter.
This function sets an internal display counter that determines whether the cursor should be displayed. The cursor is displayed only if the display count is greater than or equal to 0. If a mouse is installed, the initial display count is 0. If no mouse is installed, the display count is -1.
ClipCursor, GetCursorPos, SetCursor, SetCursorPos
|file: /Techref/os/win/api/win32/func/src/f85_9.htm, 2KB, , updated: 2001/6/24 12:11, local time: 2022/5/23 17:29,
|©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/os/win/api/win32/func/src/f85_9.htm"> ShowCursor</A>
|Did you find what you needed?|
PICList 2022 contributors:
o List host: MIT, Site host massmind.org, Top posters @20220523
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!