SetBrushOrgEx info  Overview  Group

The SetBrushOrgEx function sets the brush origin that GDI assigns to the next brush an application selects into the specified device context.

BOOL SetBrushOrgEx(

Parameters

hdc

Identifies the device context.

nXOrg

Specifies the x-coordinate, in device units, of the new brush origin. If this value is greater than the brush width, its value is reduced using the modulus operator (nXOrg mod brush width).

nYOrg

Specifies the y-coordinate, in device units, of the new brush origin. If this value is greater than the brush height, its value is reduced using the modulus operator (nYOrg mod brush height).

lppt

Points to a POINT structure that receives the previous brush origin.

This parameter can be NULL if the previous brush origin is not required.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

A brush is a bitmap that the operating system uses to paint the interiors of filled shapes.

The brush origin is a pair of coordinates specifying the location of one pixel in the bitmap. The default brush origin coordinates are (0,0). For horizontal coordinates, the value 0 corresponds to the leftmost column of pixels; the width corresponds to the rightmost column. For vertical coordinates, the value 0 corresponds to the uppermost row of pixels; the height corresponds to the lowermost row.

The operating system automatically tracks the origin of all window-managed device contexts and adjusts their brushes as necessary to maintain an alignment of patterns on the surface. The brush origin that is set with this call is relative to the upper-left corner of the client area.

An application should call SetBrushOrgEx after setting the bitmap stretching mode to HALFTONE via SetStretchBltMode. This must be done to avoid brush misalignment.

Windows NT: The operating system automatically tracks the origin of all window-managed device contexts and adjusts their brushes as necessary to maintain an alignment of patterns on the surface.

Windows 95: Automatic tracking of the brush origin is not supported. Applications must use the UnrealizeObject, SetBrushOrgEx, and SelectObject functions to align the brush before using it.

See Also

GetBrushOrgEx, POINT, SelectObject, SetStretchBltMode, UnrealizeObject 

PICList 2024 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .