please dont rip this site Prev Next

RasDialFunc1 info  Overview  Group

A RasDialFunc1 function is an application-defined or library-defined callback function that the RasDial function calls when a change of state occurs during a remote access connection process. A RasDialFunc1 function is comparable to a RasDialFunc function, but is enhanced by the addition of two parameters: a handle to the RAS connection, and an extended error code.


    HRASCONN hrasconn,

// handle to RAS connection

    UINT unMsg,

// type of event that has occurred


// connection state about to be entered

    DWORD dwError,

// error that may have occurred

    DWORD dwExtendedError

// extended error information for some errors



Provides a handle to the RAS connection, as returned by RasDial.
Specifies the type of event that has occurred. Currently, the only event defined is WM_RASDIALEVENT.
Specifies a RASCONNSTATE enumerator value that indicates the state the RasDial remote access connection process is about to enter.
Specifies the error that has occurred. If no error has occurred, dwError is zero.

RasDial calls RasDialFunc1 with dwError set to zero upon entry to each connection state. If an error occurs within a state, RasDial calls RasDialFunc1 again with a nonzero dwError value.

In some error cases, the dwExtendedError parameter contains extended error information.

Specifies extended error information for certain nonzero values of dwError. For all other values of dwError, dwExtendedError is zero.

The contents of dwExtendedError are defined for values of dwError as follows:




Specifies the NetBIOS error that occurred.


Specifies the NetBIOS error that occurred.


Specifies an internal diagnostics code.


Specifies a routing error code, which is a RAS error.

Return Values



A RasDial connection operation is suspended during a call to a RasDialFunc1 callback function. For that reason, your RasDialFunc1 implementation should generally return as quickly as possible. There are two exceptions to that rule. Asynchronous (slow) devices such as modems often have time-out periods measured in seconds rather than milliseconds; a less-than-prompt return from a RasDialFunc1 function is generally not a problem. The prompt return requirement also does not apply when dwError is nonzero, indicating that an error has occurred. It is safe, for example, to put up an error dialog box and wait for user input.

Your RasDialFunc1 implementation should not depend on the order or occurrence of particular RASCONNSTATE connection states, because this may vary between platforms.

Do not call the RasDial function from within a RasDialFunc1 callback function. You can call the RasGetConnectStatus, RasEnumEntries, RasEnumConnections, RasGetErrorString, and RasHangUp functions from within the callback function. For example, calling RasGetConnectStatus from within a callback function would be useful for determining the name and type of the connecting device.

Note that, for convenience, RasHangUp can be called from within a RasDialFunc1 callback function. However, much of the hang-up processing occurs after the RasDialFunc1 callback function has returned.

RasDialFunc1 is a placeholder for the application-defined or library-defined function name.

See Also

RasDial, RasDialFunc, RasDialFunc2, RASCONNSTATE, RasEnumConnections, RasEnumEntries, RasGetConnectStatus, RasGetErrorString, RasHangUp 

file: /Techref/os/win/api/win32/func/src/f70_2.htm, 7KB, , updated: 2000/4/7 12:19, local time: 2024/6/18 08:15,

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> RasDialFunc1</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2024 contributors:
o List host: MIT, Site host, Top posters @none found
- Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!