please dont rip this site Prev Next

HeapCreate info  Overview  Group

The HeapCreate function creates a heap object that can be used by the calling process. The function reserves a contiguous block in the virtual address space of the process and allocates physical storage for a specified initial portion of this block.

HANDLE HeapCreate(

    DWORD flOptions,

// heap allocation flag

    DWORD dwInitialSize,

// initial heap size

    DWORD dwMaximumSize 

// maximum heap size

   );

Parameters

flOptions
Specifies optional attributes for the new heap. These flags will affect subsequent access to the new heap through calls to the heap functions (HeapAlloc, HeapFree, HeapReAlloc, and HeapSize). You can specify one or more of the following flags:

Flag

Meaning

HEAP_GENERATE_EXCEPTIONS

Specifies that the system will raise an exception to indicate a function failure, such as an out-of-memory condition, instead of returning NULL.

HEAP_NO_SERIALIZE

Specifies that mutual exclusion will not be used when the heap functions allocate and free memory from this heap. The default, occurring when the HEAP_NO_SERIALIZE flag is not specified, is to serialize access to the heap. Serialization of heap access allows two or more threads to simultaneously allocate and free memory from the same heap.

dwInitialSize
Specifies the initial size, in bytes, of the heap. This value determines the initial amount of physical storage that is allocated for the heap. The value is rounded up to the next page boundary. To determine the size of a page on the host computer, use the GetSystemInfo function.
dwMaximumSize
If dwMaximumSize is a nonzero value, it specifies the maximum size, in bytes, of the heap. The HeapCreate function rounds dwMaximumSize up to the next page boundary, and then reserves a block of that size in the processís virtual address space for the heap. If allocation requests made by the HeapAlloc or HeapReAlloc functions exceed the initial amount of physical storage specified by dwInitialSize, the system allocates additional pages of physical storage for the heap, up to the heapís maximum size.

In addition, if dwMaximumSize is nonzero, the heap cannot grow, and an absolute limitation arises: the maximum size of a memory block in the heap is a bit less than 0x7FFF8 bytes. Requests to allocate larger blocks will fail, even if the maximum size of the heap is large enough to contain the block.

If dwMaximumSize is zero, it specifies that the heap is growable. The heapís size is limited only by available memory. Requests to allocate blocks larger than 0x7FFF8 bytes do not automatically fail; the system calls VirtualAlloc to obtain the memory needed for such large blocks. Applications that need to allocate large memory blocks should set dwMaximumSize to zero.

Return Values

If the function succeeds, the return value is a handle of the newly created heap.

If the function fails, the return value is is NULL. To get extended error information, call GetLastError.

Remarks

The HeapCreate function creates a private heap object from which the calling process can allocate memory blocks by using the HeapAlloc function. The initial size determines the number of committed pages that are initially allocated for the heap. The maximum size determines the total number of reserved pages. These pages create a contiguous block in the processís virtual address space into which the heap can grow. If requests by HeapAlloc exceed the current size of committed pages, additional pages are automatically committed from this reserved space, assuming that the physical storage is available.

The memory of a private heap object is accessible only to the process that created it. If a dynamic-link library (DLL) creates a private heap, the heap is created in the address space of the process that called the DLL, and it is accessible only to that process.

The system uses memory from the private heap to store heap support structures, so not all of the specified heap size is available to the process. For example, if the HeapAlloc function requests 64 kilobytes (K) from a heap with a maximum size of 64K, the request may fail because of system overhead.

If the HEAP_NO_SERIALIZE flag is not specified (the simple default), the heap will serialize access within the calling process. Serialization ensures mutual exclusion when two or more threads attempt to simultaneously allocate or free blocks from the same heap. There is a small performance cost to serialization, but it must be used whenever multiple threads allocate and free memory from the same heap.

Setting the HEAP_NO_SERIALIZE flag eliminates mutual exclusion on the heap. Without serialization, two or more threads that use the same heap handle might attempt to allocate or free memory simultaneously, likely causing corruption in the heap. The HEAP_NO_SERIALIZE flag can, therefore, be safely used only in the following situations:

See Also

GetProcessHeap, GetProcessHeaps, GetSystemInfo, HeapAlloc, HeapDestroy, HeapFree, HeapReAlloc, HeapSize, HeapValidate, VirtualAlloc


file: /Techref/os/win/api/win32/func/src/f44_15.htm, 8KB, , updated: 2000/4/7 12:19, local time: 2022/5/26 00:52,
TOP NEW HELP FIND: 
18.205.176.39:LOG IN

 ©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://www.piclist.com/techref/os/win/api/win32/func/src/f44_15.htm"> HeapCreate</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2022 contributors:
o List host: MIT, Site host massmind.org, Top posters @20220526
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .