please dont rip this site Prev Next

GetJob info  Overview  Group

The GetJob function retrieves print-job data for the specified printer.

BOOL GetJob(

    HANDLE hPrinter,

// handle of printer

    DWORD JobId,

// job identifier value

    DWORD Level,

// data-structure level

    LPBYTE pJob,

// address of data-structure array

    DWORD cbBuf,

// count of bytes in array

    LPDWORD pcbNeeded 

// address of value that contains count of bytes retrieved (or required)



Identifies the printer for which the print-job data is retrieved.
Identifies the print job for which data should be retrieved.
Specifies the level of the structure to which pJob points. This value must be either 1 or 2.
Points to an array that contains either a JOB_INFO_1 or a JOB_INFO_2 structure. If Level is 1, this function stores the data in a JOB_INFO_1 structure; if Level is 2, this function stores the data in a JOB_INFO_2 structure.
Specifies the size, in bytes, of the array.
Points to a value that specifies the number of bytes copied if the function succeeds or the number of bytes required if cbBuf is too small.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

See Also

AddJob, JOB_INFO_1, JOB_INFO_2, ScheduleJob, SetJob 

See also:

file: /Techref/os/win/api/win32/func/src/f33_2.htm, 3KB, , updated: 2000/4/7 12:19, local time: 2022/5/23 22:39,

 ©2022 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> GetJob</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2022 contributors:
o List host: MIT, Site host, Top posters @20220523
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!