AppendMenu info  Overview  Group

The AppendMenu function appends a new item to the end of the specified menu bar, drop-down menu, submenu, or shortcut menu. You can use this function to specify the content, appearance, and behavior of the menu item.

The AppendMenu function has been superseded by the InsertMenuItem function. You can still use AppendMenu, however, if you do not need any of the extended features of InsertMenuItem.

BOOL AppendMenu(

Parameters

hMenu

Identifies the menu bar, drop-down menu, submenu, or shortcut menu to be changed.

uFlags

Specifies flags to control the appearance and behavior of the new menu item. This parameter can be a combination of the values listed in the following Remarks section.

uIDNewItem

Specifies either the identifier of the new menu item or, if the uFlags parameter is set to MF_POPUP, the handle to the drop-down menu or submenu.

lpNewItem

Specifies the content of the new menu item. The interpretation of lpNewItem depends on whether the uFlags parameter includes the MF_BITMAP, MF_OWNERDRAW, or MF_STRING flag, as follows:

Value	Description
MF_BITMAP	Contains a bitmap handle.
MF_OWNERDRAW	Contains a 32-bit value supplied by the application that can be used to maintain additional data related to the menu item. The value is in the itemData member of the structure pointed to by the lparam parameter of the WM_MEASURE or WM_DRAWITEM message sent when the menu is created or its appearance is updated.
MF_STRING	Contains a pointer to a null-terminated string.

Return Values

If the function succeeds, the return value is nonzero.

If the function fails, the return value is zero. To get extended error information, call GetLastError.

Remarks

The application must call the DrawMenuBar function whenever a menu changes, whether or not the menu is in a displayed window.

The following flags can be set in the uFlags parameter:

Value	Description
MF_BITMAP	Uses a bitmap as the menu item. The lpNewItem parameter contains the handle to the bitmap.
MF_CHECKED	Places a check mark next to the menu item. If the application provides check-mark bitmaps (see SetMenuItemBitmaps), this flag displays the check mark bitmap next to the menu item.
MF_DISABLED	Disables the menu item so it cannot be selected, but the flag does not gray it.
MF_ENABLED	Enables the menu item so it can be selected, and restores it from its grayed state.
MF_GRAYED	Disables the menu item and grays it so it cannot be selected.
MF_MENUBARBREAK	Functions the same as the MF_MENUBREAK flag for a menu bar. For a drop-down menu, submenu, or shortcut menu, the new column is separated from the old column by a vertical line.
MF_MENUBREAK	Places the item on a new line (for a menu bar) or in a new column (for a drop-down menu, submenu, or shortcut menu) without separating columns.
MF_OWNERDRAW	Specifies that the item is an owner-drawn item. Before the menu is displayed for the first time, the window that owns the menu receives a WM_MEASUREITEM message to retrieve the width and height of the menu item. The WM_DRAWITEM message is then sent to the window procedure of the owner window whenever the appearance of the menu item must be updated.
MF_POPUP	Specifies that the menu item opens a drop-down menu or submenu. The uIDNewItem parameter specifies the handle to the drop-down menu or submenu. This flag is used to add a menu name to a menu bar, or a menu item that opens a submenu to a drop-down menu, submenu, or shortcut menu.
MF_SEPARATOR	Draws a horizontal dividing line. This flag is used only in a drop-down menu, submenu, or shortcut menu. The line cannot be grayed, disabled, or highlighted. The lpNewItem and uIDNewItem parameters are ignored.
MF_STRING	Specifies that the menu item is a text string; the lpNewItem parameter points to the string.
MF_UNCHECKED	Does not place a check mark next to the item (default). If the application supplies check-mark bitmaps (see SetMenuItemBitmaps), this flag displays the unchecked bitmap next to the menu item.

The following groups of flags cannot be used together:

• MF_DISABLED, MF_ENABLED, and MF_GRAYED

• MF_BITMAP, MF_STRING, and MF_OWNERDRAW

• MF_MENUBARBREAK and MF_MENUBREAK

• MF_CHECKED and MF_UNCHECKED

See Also

CreateMenu, DeleteMenu, DestroyMenu, DrawMenuBar, InsertMenu, InsertMenuItem, ModifyMenu, RemoveMenu, SetMenuItemBitmaps

PICList 2024 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .