USING THE FILL POLYGON COMMAND The Fill Polygon ( FP ) command, fills the polygon currently in the polygon buffer. For more information see the PCL 5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT. EcE Resets the printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1, (black). Even though there is no physical pen, the SP command must be used to enable printing. PA1500,1500; Specifies absolute plotting, then moves to (1500,1500). PM0;CI1000,60;PA1500,1500;CI500;PM2; Enters the polygon mode, stores a circle with radius of 1000 plotter units (plu) and a 60 degree chord angle. Stores a pen move to (1500,1500), and another circle with a 500 plu radius and a 5 degree (default) chord angle. Closes the current polygon and exits the polygon mode. LT4;FT3,50,45; Selects line type 4 and fill type 3. Specifies a 50 plu distance between the fill lines, and slants the lines at a 45 degree angle. FP; Using the even-odd fill method, this fills the polygon currently in the polygon buffer with the line and fill types specified in the command above. Ec%0A Enters the PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1913.asc, 2KB, , updated: 1993/11/15 16:18, local time: 2018/12/12 07:35,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/language/pcl/lj1913.asc"> language pcl lj1913</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181212 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Neil, Isaac M. Bavaresco, Bob Blick, Harold Hallikainen, AB Pearce - UKRI STFC, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!