RELATIVE ARC THREE POINT , ( RT ) The RT command draws an arc segment, using relative coordinates, from a starting point through an intermediate point to an end point. For more information see the PCL 5 Printer Language Technical Reference Manual. LEGEND: Ec = [Ctrl] [P] Esc} in DOS EDIT EcE Resets the Printer. Ec%0B Enters HP-GL/2 mode. IN; Initializes HP-GL/2 mode. SP1; Selects pen number 1 (black). Even though there is no physical pen, the SP command must be used to enable printing. PA1000,100; Specifies the absolute point (1000,100) as the starting location of the plot. PR;PD1500,0; Specifies relative plotting, pen down, and draws a line (1500,0) relative plotter units from the current pen location of (1000,100). PU-1850,1050;PD350,0; Lifts the pen, moves to (- 1850,1050) in relative coordinates, places the pen down, and draws a line 350 plu in the X direction. PU-350,-700;PD350,0; Lifts the pen, moves (- 350,-700) plu from the current location, places the pen down, and draws a line 350 plu in the X direction. PU0,-350;PD0,1500,1500,0; Lifts the pen, moves 350 plu to the left, places the pen down, draws a line 1500 plu up and then another line 1500 units to the right. RT700,-750,0,-1500; Draws an arc from the current pen position through a point (700,- 750) plu away, with an ending point (0,-1500) plu from the beginning of the arc. PU700,850;PD; Lifts the pen and moves it (700,850) plu from the current pen position; then puts the pen down. RT100,-100,0,-200; Draws an arc from the current pen position, through a point (100,- 100) plu away, to an ending point (0,-200) from the starting point of the arc. PU100,100;PD200,0; Lifts the pen and moves it (100,100) plu from the current pen position, places the pen down and draws a line 200 plu in the X direction. Ec%0A Enters the PCL mode. EcE Sends a reset to end the job and eject the page. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1828.asc, 4KB, , updated: 1993/11/15 17:09, local time: 2018/9/23 08:10,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/language/pcl/lj1828.asc"> language pcl lj1828</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20180923 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Bob Blick, Isaac M. Bavaresco, Neil, Denny Esterline, Harold Hallikainen, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!