please dont rip this site

Language Pcl LJ1775

DEFAULT SETTINGS FOR THE HP-GL/2 ENVIRONMENT

     
     When you enter the HP-GL/2 environment for the first
     time, all settings are at their default. When you exit
     HP-GL/2 to send other PCL commands then re-enter HP-
     GL/2, most variables retain their previous values.
     However, the following changes in the PCL environment
     can affect the HP-GL/2 environment.
     

RESETTING THE PRINTER ( "ESC E", OR CONTROL PANEL RESET ):
     
     *    Executes an IN ( Initialize ) command
     *    Defaults the PCL Picture Frame size
     *    Defaults the PCL Picture Frame anchor point
     *    Defaults the HP-GL/2 Plot size
     *    Defaults the PCL logical page orientation
     

A PAGE SIZE, PAGE LENGTH, OR ORIENTATION COMMAND:
     
     *    Defaults the PCL Picture Frame anchor point
     *    Defaults the PCL Picture Frame
     *    Defaults the HP-GL/2 plot size
     *    Defaults P1 and P2 ( IP,IR )
     *    Resets the soft-clip window to the PCL Picture
          Frame boundaries ( IW )
     *    Clears the polygon buffer ( PM0, PM2 )
     *    Updates the cursor to the lower left corner of the
          picture frame ( P1 )
     

REDEFINING THE PCL PICTURE FRAME:
     
     *    Defaults P1 and P2 ( IP,IR )
     *    Resets the soft-clip window ( IW ) to the PCL
          Picture Frame boundaries.
     *    Clears the polygon buffer ( PM0, PM2 )
     *    Updates the current pen position to the lower-left
          corner of the picture frame ( P1)
     

SETTING THE PICTURE FRAME ANCHOR POINT:
     
     *    Defaults P1 and P2 ( IP, IR )
     *    Resets the soft-clip window to the PCL Picture
          Frame boundaries ( IW )
     *    Clears the polygon buffer ( PM0, PM2 )
     *    Updates the current pen position to the lower-left
          corner of the picture frame ( P1)
     

SETTING AN HP-GL/2 PLOT SIZE:
     
     *    Changes the picture frame scaling factor
     
     
            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.
     
     


file: /Techref/language/pcl/lj1775.asc, 2KB, , updated: 2001/11/5 13:36, local time: 2017/10/17 10:25,
TOP NEW HELP FIND: 
54.92.141.211:LOG IN

 ©2017 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/language/pcl/lj1775.asc"> language pcl lj1775</A>

Did you find what you needed?

  PICList 2017 contributors:
o List host: MIT, Site host massmind.org, Top posters @20171017 RussellMc, Van Horn, David, James Cameron, Sean Breheny, IVP, alan.b.pearce, Neil, David C Brown, Bob Blick, Denny Esterline,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .