PCL5 REVERSE PATTERN TEXTLegend: Ec = [Ctrl] [P] [Esc] in DOS EDIT The following section will provide the required printer commands for reverse pattern text on the LaserJet III and LaserJet 4 Family Printer. EcE Resets the printer. Ec*p750y450X Vertical Cursor positioning command moves the cursor to the new position of 750 dots along the vertical axis. Horizontal cursor positioning command moves the cursor 450 dots along the horizontal axis. Ec*c1500A Specifies a rectangle width of 1500 dots. Ec*c1500B Specifies a rectangle height of 1500 dots. Ec*c0P Specifies Solid Black fill of the rectangle. Ec*v0N Specifies the characters and character cells as transparent so the black background will appear behind the characters. Ec*v1O Specifies that the characters be printed in an opaque mode. Ec*c1G Specifies the cross-hatch pattern to be used in the characters. Ec*v3T Allows the character to be printed as cross hatch characters rather than black characters. Ec(s1p30v0s0b4101T Specifies a proportionally spaced 30 point, upright, medium stroke weight, CG Times. Ec*p1500y713X Specifies cursor positioning 1500 dots in the vertical position and 713 dots in the horizontal position. Reverse Pattern Text TEXT EcE Ejects the page and resets the printer. Copyright Hewlett-Packard Co. 1993 The information contained herein is subject to change without notice. Hewlett-Packard shall not be liable for incidental or consequential damages in connection with the use of this material.
|file: /Techref/language/pcl/lj1718.htm, 3KB, , updated: 2008/1/18 23:49, local time: 2018/10/22 21:27,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/language/pcl/lj1718.htm"> language pcl lj1718</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181022 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Neil, Bob Blick, John Gardner, Harold Hallikainen, AB Pearce - UKRI STFC,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!