please dont rip this site
TRANSPARENT PRINT DATA COMMAND


DEFINITION
     
     The Transparent Print Data command provides printing
     access to those characters which the printer normally
     defines as unprintable.  These characters include
     decimal character codes 0, 7-15, and 27.
     
     LEGEND:  Ec = [Ctrl] [P] [Esc] in DOS EDIT

SYNTAX
     
     Ec&p#X [Transparent Print Data]
     
     # = Number of bytes of transparent print data


     Each transparent print data byte is interpreted as a
     single character code.  The appropriate character is
     printed if one exists.  If in Transparent Print Data
     mode, control codes such as LF, CR, and FF will be
     treated as print data.
     

EXAMPLE

     Assuming the currently selected symbol set is PC-8, a
     control code of 14 which would normally give you a line
     feed will print as a musical note in Transparent Print
     Data mode.
     
          Ec&p1X [ASCII 14]
          

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this
                         material.
          

See also:


file: /Techref/language/pcl/lj1617.htm, 1KB, , updated: 2003/9/29 16:35, local time: 2018/7/19 05:15,
TOP NEW HELP FIND: 
23.20.223.212:LOG IN

 ©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/language/pcl/lj1617.htm"> language pcl lj1617</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20180719 RussellMc, Van Horn, David, Sean Breheny, Isaac M. Bavaresco, David C Brown, Bob Blick, Neil, Denny Esterline, John Gardner, Brent Brown,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .