please dont rip this site

          LEGEND: Ec = [Ctrl] [P] [Esc] in DOS EDIT


     The following escape sequences will produce a black
     page.  This example was created using EDIT.


     EcE                           Printer Reset.
     Ec&l0E                        Sets the top margin to
     Ec&a0c0R                      Places the cursor
                                   position to column zero,
                                   row zero.
     Ec*c2400a3300b0P              Specifies a rectangle
                                   width of 2400 dots (8"),
                                   a rectangle height of
                                   3300 dots (11").
     Ec*c0P                        Uses a solid black fill
                                   to shade the rectangle.
     EcE                           Printer Reset; clears the
                                   printer's buffer and
                                   ejects the black page.

            Copyright  Hewlett-Packard Co. 1993
   The information contained herein is subject to change
                      without notice.
   Hewlett-Packard shall not be liable for incidental or
  consequential damages in connection with the use of this

See also:

file: /Techref/language/pcl/lj1438.htm, 1KB, , updated: 2003/9/29 15:06, local time: 2018/11/19 04:41,

 ©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF=""> language pcl lj1438</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2018 contributors:
o List host: MIT, Site host, Top posters @20181119 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Bob Blick, Neil, Manu Abraham, John Gardner, AB Pearce - UKRI STFC,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!