please dont rip this site

Right Justification of Printed Text in PCL 5

without concern for character widths or font size.

  1. Define a macro containing the text to be right justified. In the following example, that is id number 1022
  2. Position the cursor to the right edge of the desired text position
  3. Set pattern transparency to transparent and pattern to solid white
  4. Set print direction to 180 degrees
  5. Execute the macro containing the printable text.
  6. Set pattern transparency to opaque and pattern to solid black
  7. Set print direction to 0 degrees
  8. Execute the macro containing the printable text.


See also:

file: /Techref/language/pcl/justright.htm, 1KB, , updated: 2009/8/13 10:03, local time: 2021/10/25 08:21,

 ©2021 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF=""> Right Justification of Printed Text in PCL 5 without concern for character widths or font size..</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.

Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

  PICList 2021 contributors:
o List host: MIT, Site host, Top posters @20211025 Neil, Harold Hallikainen, Alan Pearce, RussellMc, Bob Blick, Allen Mulvey, Dwayne Reid, madscientistatlarge, Sean Breheny, Justin Richards,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.

Welcome to!