Duplexing refers to the printing of data (or forms) on both sides of a piece of paper. Many original forms have "terms and conditions" or other text printed on the back. These forms and other double-sided documents can be printed by a printer that has a duplex attachment, IF the correct sequence of PCL command is sent.
If printable data has been received by the printer and the duplex command is sent afterward, the page (and the printed data) will be ejected and the printer will be in duplex mode.
First, send the printer the Start Duplex Job Command. Before any other data arrives at the printer, it must be given this PCL command to begin duplex operation. The printer can't switch modes on the fly. The duplex command is esc&l1S for long edge binding or esc&l2S for short edge binding.
Send the data from the application. After the printer is in duplex mode, the printable data can be sent from the application program.
Call the form for the front page. Send the standard form overlay command. esc&f#Yesc&f4X
Eject the page. Send the Form Feed command to the printer. At this point the printer will not eject the page but will instead turn the page over in the duplexer.
Send data for back page (if any.)
Call the form for the back page.
Sned a Form Feed. The printer will now eject the page.
I am a novice DeskJet 890C printer user and need help in finding PCL3 coding for simple things like compressed print, Italic, Bold etc AND some guidance on how to send the control strings to my printer.James Newton replies: I have no information about PCL3. HP does.+
Hi,James Newton replies: PCL can support that, but I don't know if the application program or printer driver can be setup to send the PCL required for it.+
I would like to ask, is that possible to print duplex on certain page only? This is because I need to print a Delivery Order, which the terms and condition will be at the back of first page. This means only first paper will printed both side (front and back), and the other pages will be printed in every new paper. I am sending oracle report from from oracle e-suites.
Looking for your help. Thanks in advance.
|file: /Techref/language/pcl/duplex.htm, 5KB, , updated: 2008/10/8 13:56, local time: 2018/10/15 09:28,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/language/pcl/duplex.htm"> language pcl duplex</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181015 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Bob Blick, Isaac M. Bavaresco, Neil, Denny Esterline, Harold Hallikainen, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!