please dont rip this site

Mach3^ Linistepper / SLAm Quick Start


So you've got your board's built, now you want to see your motors run! Here's a quick start guide to configuring Mach3 to run your linistepper boards.

  1. After downloading Mach3, install and reboot your system.
     
  2. Disable ESTOP unless you have added the associated switches.
  3. Config Port Pins. Define X, Y and Z axis step and direction pins on the Parallel Port.
  4. Enable the enable signals. Go to "Config...", "Ports & pins". On the "Output Signals" tab, enable the enable signals you configured in the previous step. (thanks Aarin!)
  5. Setup motor tuning. Do this routine for each axis...Saving each one after you enter the data.
  6. Setup Hotkeys This is really cool! This makes it very easy to setup keys for motor jogging or testing

Hope this quick start helps you configure your system! These setup directions are from hours of trial and error use at your own risk!

If you notice anything I missed or revision please email me  {ed: or use the form at the bottom of the page to add your comments} and we will update.

Mach 3 also has a Yahoo users group you can join.

Thanks and enjoy! Feel free to share this information with others.

Brian gerber N3GUC@yahoo.com

Questions:

See also:


file: /Techref/io/stepper/linistep/mach3.htm, 5KB, , updated: 2013/5/30 09:29, local time: 2014/9/2 19:06,
TOP NEW HELP FIND: 
54.91.50.239:LOG IN

 ©2014 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/techref/io/stepper/linistep/mach3.htm"> Mach3 linistepper Quick Start</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 
Stepper motors CAN be smooth!
And stepper controllers can be strong and cheap. Roman Black's Linistep stepper controller kits:
o 18th microstep
o Linear smoothing
  o Open source
o Full kit $25!
 

Welcome to www.piclist.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .