Phil Eisermann [mazer at ix.netcom.com] says
Of course, if you have ever left your pH probe in your saltwater tank for any length of time, you'd find it was impossible to recalibrate. I know this from personal experience. They tend to last around 8 months or so. I have never had one last more than one year.
Keep in mind this will vary with the quality of the probe. I finally tired of replacing the $50 PinPoint probe twice a year. I store my probe in an "electrode storage solution" from Hach.
http://www.electrodesdirect.com Factory-Direct Supplier of pH, ORP, Conductivity, Dissolved Oxygen, Ion Selective Electrodes, Meters, and Monitors for the laboratory, process, and biotechnology industries.+
|file: /Techref/io/sensor/ph.htm, 2KB, , updated: 2004/11/24 23:13, local time: 2016/2/7 05:22,
|©2016 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/io/sensor/ph.htm"> Acidity</A>
|Did you find what you needed?|
PICList 2016 contributors:
o List host: MIT, Site host massmind.org, Top posters @20160207 RussellMc, Bob Blick, Peter, alan.b.pearce, embedded systems, Neil, Dwayne Reid, Isaac Marino Bavaresco, IVP, Jean-Paul Louis,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!