Function 1Bh Get Current Drive File Allocation Table Information
Returns information from the FAT on the current drive
entry AH 1Bh
exit AL number of sectors per allocation unit (cluster)
DS:BX address of the current drive's media descriptor byte
CX number of bytes per sector
DX number of allocation units (clusters) for default drive
note 1) Save DS before calling this function.
2) This call returned a pointer to the FAT in DOS 1.x. Beginning with
DOS 2.00, it returns a pointer only to the table's ID byte.
3) IBM recommends programmers avoid this call and use int 25h instead.
See also:
| file: /Techref/int/21f/1b.htm, 0KB, , updated: 1999/2/20 10:26, local time: 2012/2/10 01:20,
38.107.179.233:LOG IN |
| ©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/techref/int/21f/1b.htm"> int 21f 1b</A> |
| Did you find what you needed? |
THE book for getting started with the PIC uC!
5 stars at Amazon.com
Now available from piclist.com for $34.95 ($7.50 S&H)
|
Robotics nuts!Check out http://users.frii.com/dlc/robotics/projects/botproj.htm from Dennis Clark. This guy ROCKS! He has made (and sells but also releases code, docs, etc...) for a number of cool little robotic modules including whiskers, IR proximity detect and remote control, Sonar proximity detect, PWM, Servo, compass. Most of these use the little PIC 12C508 controller which costs basically nothing and is soooo tiny.The 4 servos, 2400 baud serial servo controller is a wonder of magic and he sells the programmed chip for $8. Wow! |
.