Language Reference |
See Also Applies To
Retrieves the time stored in a Date object.
The getTime method returns an integer value representing the number of milliseconds between midnight, January 1, 1970 and the time stored in the Date object. The range of dates is approximately 285,616 years from either side of midnight, January 1, 1970. Negative numbers indicate dates prior to 1970.
When doing multiple date and time calculations, it is frequently useful to define variables equal to the number of milliseconds in a day, hour, or minute. For example:
varMinuteMilli = 1000 * 60
varHourMilli = varMinuteMilli * 60
varDayMilli = varHourMilli * 24
© 1997 by Microsoft Corporation. All rights reserved.
|file: /Techref/inet/iis/jscript/htm/js70.htm, 2KB, , updated: 1997/9/30 04:45, local time: 2018/10/21 13:22,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/inet/iis/jscript/htm/js70.htm"> getTime Method</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20181021 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Neil, Bob Blick, John Gardner, Harold Hallikainen, AB Pearce - UKRI STFC,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!