Language Reference |
Used to perform a bitwise AND on two expressions.
result = expression1 & expression2
The & operator syntax has these parts:
Part Description result Any variable. expression1 Any expression. expression2 Any expression.
The & operator looks at the binary representation of the values of two expressions and does a bitwise AND operation on them. The result of this operation behaves as follows:0101 (expression1) 1100 (expression2) ---- 0100 (result)
Any time both of the expressions have a 1 in a digit, the result has a 1 in that digit. Otherwise, the result has a 0 in that digit.
For information on when a run-time error is generated by the & operator, see the Operator Behavior table.
© 1997 by Microsoft Corporation. All rights reserved.
|file: /Techref/inet/iis/jscript/htm/js631.htm, 2KB, , updated: 1997/9/30 04:44, local time: 2018/8/17 04:01,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/inet/iis/jscript/htm/js631.htm"> & Operator</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20180817 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Bob Blick, Neil, John Gardner, Denny Esterline, Brent Brown,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!