Language Reference |
See Also Applies To
Retrieves the number of minutes past the hour from the minutes value stored in a Date object according to local time.
To get the minutes value according to Universal Coordinated Time (UTC), use the getUTCMinutes method.
The getMinutes method returns an integer between 0 and 59 equal to the minutes value stored in the Date object. A zero is returned in two situations: one occurs when the time is less than one minute after the hour. The other occurs when the time was not stored in the Date object when the object was created. The only way to determine which situation you have is to also check the hours and seconds for zero values. If they are all zeroes, it is nearly certain that the time was not stored in the Date object.
© 1997 by Microsoft Corporation. All rights reserved.
|file: /Techref/inet/iis/jscript/htm/js61.htm, 2KB, , updated: 1997/9/30 04:44, local time: 2018/8/16 01:01,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/inet/iis/jscript/htm/js61.htm"> getMinutes Method</A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20180816 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Isaac M. Bavaresco, Bob Blick, Neil, John Gardner, Denny Esterline, Brent Brown,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!