Language Reference |
See Also Applies To
Retrieves the hours stored in a Date object according to local time.
To get the hours value according to Universal Coordinated Time (UTC), use the getUTCHours method.
The getHours method returns an integer between 0 and 23 indicating the number of hours since midnight. A zero occurs in two situations: the time is before 1:00:00 am, or the time was not stored in the Date object when the object was created. The only way to determine which situation you have is to also check the minutes and seconds for zero values. If they are all zeroes, it is nearly certain that the time was not stored in the Date object.
© 1997 by Microsoft Corporation. All rights reserved.
|file: /Techref/inet/iis/jscript/htm/js55.htm, 2KB, , updated: 1997/9/30 03:44, local time: 2019/2/20 23:01,
|©2019 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/inet/iis/jscript/htm/js55.htm"> getHours Method</A>
|Did you find what you needed?|
PICList 2019 contributors:
o List host: MIT, Site host massmind.org, Top posters @20190220 David Van Horn, RussellMc, AB Pearce - UKRI STFC, Neil, Allen Mulvey, James Cameron, mike brown, David C Brown, Denny Esterline, stephen.forrest,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!