This property specifies authentication persistence across requests on a connection. If the value is 0x40, then authentication persists only for a single request. If the value is 0x80, then authentication persists only for a single request if it is a proxy request and the request is not handled by Microsoft® Proxy Server. (i.e. If Proxy Server is running on the local IIS server and the request is targeted to a non-local server.) If the value is 0x100, then authentication is valid for a single request if the request is by proxy.
The following table describes this property:
Data type | Long |
Default value | 0x80 (Single request, if proxy) |
Default inheritance | Inheritable |
Accessible by IIS Admin Objects:
IIsWebService | IIsWebServer | IIsWebVirtualDir | IIsWebDirectory |
IIsWebFile |
© 1997 by Microsoft Corporation. All rights reserved.
file: /Techref/inet/iis/iis/htm/sdk/arpr03hh.htm, 2KB, , updated: 2002/5/22 16:37, local time: 2025/5/15 01:59,
3.135.182.75:LOG IN
|
©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://www.piclist.com/techref/inet/iis/iis/htm/sdk/arpr03hh.htm"> AuthPersistence</A> |
Did you find what you needed? |
![]() o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr. |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.