You can click in the main page on inputs to change their values. Everything should follow your changes. You can define a new display window in the schematics window by pressing z on two corners. You can get the full view by pressing f, or use i, j, k, m to move the point of view. Pressing d near an element gives you delay info about it (crude) in the top message bar. Clicking on one of the bottom buttons loads a different predefined page. This is the test.skip file for example.
Page maintenue par Jean-Claude Dufourd
Last modified: Mon May 6 09:26:08 1996
|file: /Techref/fr/enst/www-elec/http/~dufourd/skip-beta/test.skip.htm, 1KB, , updated: 2003/9/27 04:29, local time: 2018/9/23 11:59,
|©2018 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?|
<A HREF="http://www.piclist.com/techref/fr/enst/www-elec/http/~dufourd/skip-beta/test.skip.htm"> Test skipper </A>
|Did you find what you needed?|
PICList 2018 contributors:
o List host: MIT, Site host massmind.org, Top posters @20180923 RussellMc, Van Horn, David, Sean Breheny, David C Brown, Bob Blick, Isaac M. Bavaresco, Neil, Denny Esterline, Harold Hallikainen, John Gardner,
* Page Editors: James Newton, David Cary, and YOU!
* Roman Black of Black Robotics donates from sales of Linistep stepper controller kits.
* Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters.
* Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated!
* Contributors: Richard Seriani, Sr.
Welcome to www.piclist.com!