please dont rip this site
previous | start | next

DISKCOPY 

Copies the contents of one floppy disk to another.

DISKCOPY [drive1: [drive2:]] [/V]

  /V   Verifies that the information is copied correctly.

The two floppy disks must be the same type.
You may specify the same drive for drive1 and drive2.

Back to the top of this page

 


previous | start | next

See also:

file: /Techref/os/win/winnt/slide23.htm, 1KB, , updated: 2004/5/26 15:03, local time: 2012/5/24 22:25,
TOP NEW HELP FIND: 
38.107.179.232:LOG IN
 ©2012 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE! / 

<A HREF="http://www.piclist.com/tecHREF/os/win/winnt/slide23.htm"> Help for all NT Version 4.0 commands</A>
After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?
 
Stepper motors CAN be smooth!
And stepper controllers can be strong and cheap. Roman Black's Linistep stepper controller kits:
o 18th microstep
o Linear smoothing 		  o Open source
o Full kit $25!
 

Peter Todd has released source and sample projects for his artwork, including his 3d wireframe cube renderer for the PIC 18f6520 This includes examples of hardware developed with free software tools such as gEDA/gschem/PCB, SDCC, gputils and picp all on Linux. http://petertodd.ca/art/source-code/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .