PORT_INFO_2 info  Overview  Group

The PORT_INFO_2 structure identifies a supported printer port.

typedef struct _PORT_INFO_2 { // pi2 

    LPSTR pPortName; 

    LPSTR pMonitorName 

    LPSTR pDescription; 

    DWORD fPortType; 

    DWORD Reserved; 

} PORT_INFO_2; 

 

Members

pPortName

Points to a null-terminated string that identifies a supported printer port (for example, “LPT1:”).

pMonitorName

Points to a null-terminated string that identifies an installed monitor (for example, “PJL monitor”).

pDescription

Points to a null-terminated string that describes the port in more detail (for example, if pPortName is “LPT1:”, pDescription is “printer port”).

fPortType

Identifies the type of port. Can be one of these values:

PORT_TYPE_WRITE

PORT_TYPE_READ

PORT_TYPE_REDIRECTED

PORT_TYPE_NET_ATTACHED

Reserved

Reserved; must be zero.

Remarks

Use the PORT_INFO_2 structure when calling EnumPorts if there are multiple monitors installed that support the same ports.

See Also

EnumPorts 

PICList 2025 contributors: o List host: MIT, Site host massmind.org, Top posters @none found - Page Editors: James Newton, David Cary, and YOU! * Roman Black of Black Robotics donates from sales of Linistep stepper controller kits. * Ashley Roll of Digital Nemesis donates from sales of RCL-1 RS232 to TTL converters. * Monthly Subscribers: Gregg Rew. on-going support is MOST appreciated! * Contributors: Richard Seriani, Sr.

  .